iFlight BLITZ Whoop F7 AIO
- Specifications
- Wiring Diagrams
- Photos
- Notes
Target:
IFLIGHT_BLITZ_F7_AIO
MCU:
STM32F745
IMU:
ICM42688P / BMI270
OSD:
AT7456E
Baro:
DPS310
Blackbox:
2MB
Measurements:
Size: TODO
Mounting: 25.5 x 25.5 mm
Weight: 10.5 g
Other Features
- SD Card Slot: No
- Onboard Receiver: No
- Hardware Inverter: No
- Bluetooth: No
- WiFi: No
- Onboard RGB LED: Yes
Input/Output
- USB Connector: Micro-USB
- Motor Outputs: 4x
- UARTs: 8x
- I2C: Yes
- SWD: TODO
- SPI: TODO
- 3.3V Output: TODO
- 4.5V (VBUS) Output: TODO
- 5V Output: Yes
- 10V Output: No
- Current Sensor: Yes
- Analog RSSI Input: Yes
- LED Strip Output: Yes
- Buzzer Output: Yes
Pads
UARTs
| Name | Label | Notes |
|---|---|---|
| UART 1 | TODO | TODO |
| UART 2 | TODO | TODO |
| UART 3 | TODO | TODO |
| UART 4 | TODO | TODO |
| UART 5 | TODO | TODO |
| UART 6 | TODO | TODO |
| UART 7 | TODO | TODO |
| UART 8 | TODO | TODO |
Power
| Name | Label | Count | Notes |
|---|---|---|---|
| Battery Voltage | TODO | TODO | TODO |
Connectors
- Manufacturer: iFlight Innovation Technology Ltd. — https://www.iflight-rc.com/
- Product: iFlight BLITZ Whoop F7 AIO (2-6S, 55A) — flight controller with an integrated 4-in-1 ESC (also marketed as "BLITZ F7 55A AIO").
- Integrated ESC: 55A continuous / 65A peak (10 s), BB21 ESC MCU, FD6288 gate driver, ships with Bluejay (Q-H-40) firmware and supports bidirectional DShot (DShot150/300/600). A later V2 board revision ships a BLHeli_S ESC.
- Battery input: 2-6S LiPo / LiHV.
- Power: onboard 5V 2.5A BEC for the FC and peripherals (VTX/camera).
- Onboard current sensor (scale 200, i.e. 1/10 mV/A) — matches the firmware default.
- Board orientation is rotated: config sets
DEFAULT_ALIGN_BOARD_YAW 135.